Wound Filter Cartridges are designed to meet the most demanding
filtration application. They offer an economic, compact, easily
installed and maintained filtration system for removal of particles from
liquid. are manufactured using the latest winding technology which
gives true graded density with denser layers inside and coarser layers
outside. This produces superior depth filters with increased filtration
capacity, longer service life and higher performance that reduces
overall costs.
These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound Filter cartridges with cautiously controlled micron rating. From raw materials to finished products we are in control of the quality and filtration characteristics. They are appreciated due to its high dirt holding capacity and rugged construction that allows facing different applications in liquid and gas filtration.
The quality of a wound filter cartridge hugely depends on the type of yarn that is used to make the filter. The material of the core and a controlled manufacturing mechanism that produces a precise micron rating also contribute. One should bear in mind the filtration application and other involved physical and chemical parameters before choosing a string wound filter cartridge.
Filter specification :
Media : Polypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
Core : Polypropylene, Tinned Steel, Stainless Steel 304 & 316
Removal Ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm
End Connections: DOE ( Standard ) / SOE (on demand)
Nominal lengths : 9.75, 10, 20, 30 & 40 inches
Outside Diameter: 64 mm(2.5”) 100 mm(4”), 110mm(4.5”) 6”, 8”
Inner Diameter: 28mm
Maximum operating Temp: PP: 80°C. Cotton with SS Core: 120°C; Glass Fibre with SS Core: 400°C
Recommended Maximum differential pressure: 35psig
Factory: 108, Nilganj Road, Mirhati, Amdanga, Kolkata-700125
Contact: +91-9051825548 / 9163399482 / 9163399702
Email: sales@samrfilter.com / kolkata@samrfilter.com
These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound Filter cartridges with cautiously controlled micron rating. From raw materials to finished products we are in control of the quality and filtration characteristics. They are appreciated due to its high dirt holding capacity and rugged construction that allows facing different applications in liquid and gas filtration.
The quality of a wound filter cartridge hugely depends on the type of yarn that is used to make the filter. The material of the core and a controlled manufacturing mechanism that produces a precise micron rating also contribute. One should bear in mind the filtration application and other involved physical and chemical parameters before choosing a string wound filter cartridge.
Filter specification :
Media : Polypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
Core : Polypropylene, Tinned Steel, Stainless Steel 304 & 316
Removal Ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm
End Connections: DOE ( Standard ) / SOE (on demand)
Nominal lengths : 9.75, 10, 20, 30 & 40 inches
Outside Diameter: 64 mm(2.5”) 100 mm(4”), 110mm(4.5”) 6”, 8”
Inner Diameter: 28mm
Maximum operating Temp: PP: 80°C. Cotton with SS Core: 120°C; Glass Fibre with SS Core: 400°C
Recommended Maximum differential pressure: 35psig
Get in touch with us
SAMR Filtration Private Limited
Office: 23/4, Kashinath Building, Talikhola, Barasat, Kolkata-700125Factory: 108, Nilganj Road, Mirhati, Amdanga, Kolkata-700125
Contact: +91-9051825548 / 9163399482 / 9163399702
Email: sales@samrfilter.com / kolkata@samrfilter.com
No comments:
Post a Comment